塑料颗粒（Plastic particles）.docVIP

塑料颗粒（Plastic particles） Waste plastics recycling and recycling methods Wuhan plastic recycling manufacturers, the worlds total output of synthetic resin has reached 200 million T, after a large number of consumption, plastic processing has become a hot spot of todays earth environment protection. At present, there are several ways to deal with the consumption of plastic: 1 landfill: 2 incineration: 3 composting; 4 recycling; 5, using degradable plastics. Plastic recycling method Plastic recycling methods are: regeneration, thermal cracking, energy recovery, recycling of chemical raw materials and other methods. (1) melting, regeneration, melting and regeneration are methods of reheating and plasticizing waste plastics. From the source of waste plastics, it can be divided into two categories: one is made of resin factory, recycling scrap recycling and processing plant cleaning waste plastic recycling; two is through the use of a variety of plastic products after mixed together. The former is called pure regeneration, which can be used to produce better plastic products. The latter is called compound regeneration, which can only be used to prepare plastic products with relatively poor performance requirements, and the process of recovery and recycling is more complicated. (2) thermal cracking pyrolysis cracking method is a method to produce fuel oil and fuel gas by pyrolysis of selected waste plastics. (3) energy recovery and energy recovery are methods of utilizing waste plastics to produce heat when they are burned. (4) recovery of chemical raw materials, some varieties of plastic, plus polyurethane, can be obtained by hydrolysis of synthetic monomer. This is a chemical decomposition of waste plastics into chemical raw materials for recycling. (5) the other, in addition to the method of recycling of waste plastics, and method of using the waste plastics, such as water retention will waste polystyrene foam after smashing into the soil to improve soil, ventilation and