塑料线槽配线工艺（Plastic trunking wiring process）.docVIP

塑料线槽配线工艺（Plastic trunking wiring process） Plastic groove wiring 1 range The process standard is applicable to the electrical wiring works in the dry room. 2 construction preparation 2.1 material requirements: 2.1.1 Plastic wire groove: composed of trough bottom, groove cover and accessories. It is extruded by nonflammable hard PVC engineering plastics. It is strictly prohibited to use the material of burning resistant material. Selection of plastic groove, should be based on design requirements, select models, specifications of the corresponding stereotypes. The environmental temperature of its installation shall not be below -15 centigrade, and its oxygen index shall not be less than 27%. The inside and outside of the groove should be smooth and edge free, and there should be no distortion such as twisting and curling. And have product qualification certificate. 2.1.2 Insulated wire: the type and specification of the wire must comply with the design requirements. The minimum allowable cross section of the wire core for the wire groove is 1.0mm2, the copper wire is 2.5mm2. 2.1.3 Screw connection button: according to the wire cross section and the number of wires, select the corresponding type of reinforced insulation steel shell screw button. 2.1.4 LC safety pressing line cap, please refer to 3 - 8, 2.1.5 related content. 2.1.5 Casing: there are three kinds of bushing: copper sleeve, aluminium sleeve and copper aluminum transition sleeve. The same material bushing should be adopted when selecting. 2.1.6 Terminals (wiring nose): when choosing, should be based on the number of wires and the total cross section, select the corresponding specifications of the terminal. 2.1.7: brick made of wood ladder, use should be embalmed. 2.1.1 Plastic expansion tube: when choosing, the specifications should be corresponding to the load of the electric appliance being fastened, and choose the same type of round head machine screw and washer. 2.1.9 Galvanized material: when choosing