3d电影基础知识（Basic knowledge of 3D movies）.docVIP

3d电影基础知识（Basic knowledge of 3D movies） Brief introduction of 3D Technology 3D movie Basics We all know that 3D screening is focused on how to separate the two images, and the separate process is generally divided into two steps. The first step is to separate the left and right eye images projected on the screen, the second step is to put the image around the eyes through the glasses were received. The best way is to separate the projection image with two projectors are projected around the eyes (called dual 3D), this is the best and most direct effect, brightness, contrast, saturation, without loss of resolution. Double 3D including IMAX 3D are doing. The 3D system of SONY 4K projector is a single double mirror respectively two 2K projection screen, with essentially the same dual 3D. Dual system to use two projectors so expensive, rarely used. The other methods are 3 single frequency time difference type alternating display, picture projector is continuous switching projection around the eyes. This will directly lead to the loss of brightness, while the drag shadow appears easily. This kind of system needs either in the office or in the use of glasses lens synchronous device. Once the use of synchronous device is likely because of improper synchronization of left and right eye image and the corresponding error and ghosting. For a single machine system receives separately can be divided into two kinds of active and passive. The active electronic device is installed as synchronous control about lens shutter synchronous switch. The common XPAN-D is such. Although this device is more expensive glasses (700 a), but because the projection system is cheap, so widely used in domestic. But the XPAN-D synchronization is the most error prone. But because of the use of shutter glasses, is the most dark all technology, will have a strong urge to pick glasses. The passive voice is installed in the lens through synchronization points like device, different treatment to the left an