pkpm常见问题（The common problem of PKPM）.docVIP

pkpm常见问题（The common problem of PKPM） PKPM modeling and computing common problem solving summary PKPM virtual beam 1. concept of virtual beam The definition of virtual beam: concrete beam with 100mmx100mm cross section, the software is automatically identified as virtual beam. The definition and layout method of virtual beam is the same as that of common beam. The function of virtual beam: guide the finite element analysis program to divide the unit and determine the network boundary. Both old and new versions of the software are required to be equipped with virtual beams: (1) the program of slab column shear wall structure, thick plate transition structure and non beam floor structure are analyzed by finite element method; (2) when the back type non beam floor appears complex connected domain, (3) using complex slab finite element calculation program SLABCAD to calculate and analyze. 2. the difference between virtual beam and rigid beam: Both imaginary beam and rigid beam are virtual beams not in actual engineering. They are special beams needed for special structural analysis. But there is a big difference between the two: (1) the virtual beam must define the beam whose cross section is 100mm * 100mm, and the rigid beam does not have to be defined separately, and any defined beam can be selected. (2) both the virtual beam and the rigid beam should be artificially arranged in the modeling stage, but the virtual beam can be automatically identified by the software. The rigid beam can be automatically identified by the program, or it can be set in the special component. (3) both the old and new versions of the virtual beam are needed. Rigid beams are only used in the old software. Is it necessary to set the hinge between the secondary beam and the side span of the main beam of the PKPM? Is it necessary to set the hinge between the secondary beam and the side span main beam? Generally speaking, the concrete beams are rigidly connected, and there is no rigid hinge. If i