侧向刚度和刚度比的理解（The lateral stiffness and stiffness than understanding）.docVIP

下载本文档

6
0
约7.02千字
约 8页
2017-08-17 发布于河南
举报
版权申诉

侧向刚度和刚度比的理解（The lateral stiffness and stiffness than understanding）.doc

1、本文档共8页，可阅读全部内容。
2、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。
3、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
5、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
6、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
7、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
8、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

侧向刚度和刚度比的理解（The lateral stiffness and stiffness than understanding）

侧向刚度和刚度比的理解（The lateral stiffness and stiffness than understanding） Understanding of the lateral stiffness and stiffness ratio in the SATWE total information Understanding of the lateral stiffness and stiffness ratio in the SATWE total information: 1. Ratx, Raty:, X, Y direction, the ratio of the lateral stiffness of the tower column to the displacement stiffness of the corresponding tower at the next layer (shear stiffness) Understanding: according to the regulations of the anti regulation 6.1.14 and the regulation of 5.3.7, the basement can be used as the upper end of the superstructure when the first floor of Ratx and Raty is less than 0.5. Ratx=Ki/Ki-1 (ratio of shear stiffness) 2. Ratx1, Raty1: X, the ratio of the lateral stiffness of the tower in the Y direction to the ratio of the lateral displacement stiffness of the tower to the upper layer, or the ratio of the average lateral displacement stiffness of the upper three layers to 80%. Understanding: according to the 3.5.2, the values of Ratx1 and Raty1 are meaningful only to the frame structure and have no meaning to other structures. Only when the Ratx1 and Raty1 are larger than 1 can the lateral stiffness changes of the frame structure in the two directions continue. Ratx1= Ki/Ki+1 (lateral stiffness) 3., Ratx2, Raty2: X, Y direction, the lateral displacement stiffness of this tower and the ratio of the lateral displacement stiffness of the tower at the upper storey, 90% (110%) or 150% (110%), when the layer is 1.5 times higher than the adjacent upper layer, the 150% finger is embedded in the solid layer Understanding: according to the regulation of 3.5.2, the values of Ratx2 and Raty2 are significant for frame shear, plate column shear, shear wall structure, frame tube and tube in tube structure. When the Ratx2 and Raty2 are greater than 1, the lateral stiffness of the structure is changed continuously. Ratx2=, Ki*hi/ (Ki+1*hi+1) (lateral stiffness) For 150%, the term norm means that the ratio of the block