高层建筑嵌固端（Embedded end of high-rise building）.docVIP

高层建筑嵌固端（Embedded end of high-rise building） Thanks to the steel structure forum wxl_1973 Abstract: the structure of the high-rise building block to determine the fixed end has a great influence on the authenticity and accuracy of the calculation results of the structure, so the correct selection of structural fixed ends and the structure of fabric reinforcement structure and give the necessary protection, is an important link in structure design. In this paper, the choice of embedded end of high-rise building structure is discussed, and some related problems that deserve to be considered and solved are pointed out. 1. introduction The high-rise building must first determine the structure of fixed end position before the structure analysis and calculation, and the selection of built-in end faces different situations, such as no basement foundation but deeply buried; without a basement, but the number of more or less, and different foundation forms etc.. According to the above correct selection of the structure of fixed end is calculated, the high-rise building structure model is an important assumption, it is not only related to the accuracy of distribution of some component internal force in the structure, but also affect the structure of the authenticity of the lateral displacement, and the economy of the local structure, so it is necessary to further explore the block structure the fixed end of the selected, and byextension, some related technical problems. The condition of the embedded end of the structure The embedded end of high-rise building is usually chosen to be marked on the ground, but the ground elevation is conditional on the embedded end of the structure, and there is a lot of attention when calculating the height of the first floor. 2.1 the condition of having a basement (1) the basement roof elevation and outdoor floor height can not be too large, extreme conditions such as semi basement is the first floor can be structural fixed ends, unless its hei