施工工艺大全大型悬挑现浇钢筋混凝土异形柱施工技术（The construction technology of the large cantilever cast-in-place reinforced concrete special-shaped column construction technology）.docVIP

施工工艺大全大型悬挑现浇钢筋混凝土异形柱施工技术（The construction technology of the large cantilever cast-in-place reinforced concrete special-shaped column construction technology） Construction technology of large cantilever cast-in-place reinforced concrete special-shaped column Aerospace Department, a demonstration hall, a large integrated public facilities, North and South 90m, east-west width of 50m, construction area of 10010m2. The building, with a presentation hall as its core, is surrounded by 2 exhibition corridors. The north side is the 3 floor, with exhibition halls, lecture halls, secret rooms, VIP rooms and conference rooms. The structure adopts large space and large span frame type cast-in-place reinforced concrete frame shear wall structure system. With the size of 9m * 12M, 6m * 8m, the four corners of the 180mm thick reinforced concrete shear wall a. The height of the first floor of 8m, 2m, two layers of high of 4m, central hall roof adopts oblique orthogonal welded spherical grid, grid size is 3.615m * 3.615m * 3.615m grid, north-south span is 65m, pick 6m hanging on the south side, East span is 45m, covering an area of about 3000m2. The highest point on the top of the grid is 34.280m. To reflect the grandeur and atmosphere of its architectural design, the roof of the exhibition hall is designed as a Y shape with a North height and a low south. The height is about 12M, the spherical grid supporting frame columns are processes, set up 6 harrier bidirectional variable cross-section folding cantilever column, the column height of 33.38m, 17m from the above South gradual deformation of cantilever, cantilever length is 6.36m, the column section (1.85~2.836) * 0.6m, two North and south side line angles 68.65 degrees and 64.17 degrees. According to the arrangement of the whole structure, the cantilevered part in 19.00m, 23.00m and 27.0m site set up 3 tailgate beam (Figure 3-15-1). The main shaft bars are 46 Phi 32, 10, stirrups? Concrete strength grade is C40, single column l7m