实操（Practical operation）.docVIP

实操（Practical operation） Adjustment of belt deviation 1 correctly judge the reason and location of belt deviation (no load or load). Can not accurately determine the reasons and parts of belt deviation, 5-15% may be assessed according to the circumstances 2 select the regulator of the reasonable position (up or down the regulator) to adjust, and the adjustment method is correct. If the belt is shifted on the side of the belt, the adjusting roller will be pushed towards the belt. Observe and adjust the effect, adjust a number of regulators according to the situation. The adjuster is not selected correctly; the total score is 20%; the adjustment method is not correct; the 10-40% is checked and the direction reversal test is checked 100% 3, if the effect is not good, according to the belt deviation reasons, take corresponding measures to deal with. (10%) Two manual operation of sampler in place 1 select the sampler to be operated according to the mode of operation and check that the sampler is not abnormal. (20%) 2, check the sampler, the operation panel on the conversion button and the indicator light is normal. (10%) Local position will be converted to 3 local / remote button, indicator light; manual / automatic button switch to manual manual position indicator light; the splitter and the sampling period is set (according to the specific switch). (40%) 4 press the system start button, the system running indicator light (green), start the sampler running. Check the running condition at the same time. (20%) 5 stop the sampler running ---- press the system stop button, then switch the button back to the automatic position. (10%) Three fine crusher size adjustment 1 fine machine running condition, can carry on the adjustment of grain size. The correct total score of 5%, incorrect assessment 100% 2 fine machine in no-load condition. The correct total score of 5%, incorrect assessment 100% 3, determine the fine machine is reversed. The correct total score of 20%, incorrect