岩 土 描 述（Geotechnical description）.docVIP

岩 土 描 述（Geotechnical description） Rock and soil which was described AP Improving the general provisions of H.1 AP H.1.1 rock description should include geological, geological name, weathering degree, color, structure, structure, main mineral and rock quality index RQD. For sedimentary rocks, the size, shape, composition and degree of cementation of the sediments should be emphatically described. The crystalline size and crystalline degree of minerals should be emphasized in magmatic rocks and metamorphic rocks. Which was based on the rock quality index of RQD, can be divided into good (RQD90), good (RQD=75-90), low (RQD=50-75) and poor (RQD=25-50) and poor (RQD25). AP H.1.2 rock description should include structural plane, structure, rock thickness and structure type, and should comply with the following provisions: Improving the structure of the 1 types, including descriptions of nature, occurrence, combination, development, extension, close degree, roughness, filling and filling properties and water filling properties. AP 2 structure description includes the type, shape, size and structure in the surrounding rock stress etc.; Which was 3 the thickness of rock classification should be according to table H.1.2. Improving the thickness of rock classification table H.1.2 Which was a thick layer of thickness h classification (m) thick layer thickness classification H (m) The brand of thick thick layer of h 1.01.0 more than h0.5 thick layer of thin layer 0.5 is greater than or equal to h0.1h less than or equal to 0.1 In addition to improving the H.1.3 grading or plastic index name, named comprehensive soil shall comply with the following provisions: Which was the 1 special causes and in the soil should be combined with its causes and characteristics in naming; Which was 2 of special soil, should be combined with the particle size distribution, plasticity index name; 3 of which was preceded by mixed soil, containing mainly soil classification; Which was 4 of the phase is