施工图纸1（Construction drawing 1）.doc

施工图纸1（Construction drawing 1） Structural construction drawing, 1. part of the building drawing The first step is to understand the structure design and construction drawing, construction of the building design is the leading professional, no other professional architectural design is not designed, so it is very important to understand construction drawings. On the whole construction drawing includes the following parts: list of drawings, window table, general description of building design, a layer of ~ the roof plan, elevation, back elevation, east west elevation, elevation, section (as the case, there are many), detail drawing and doors and windows, stairs drawing (visual function may have more than one stair and elevator). As a structure designer must be serious to building plans and again, do not know where to other professionals involved in building and building on the map please, to be absolutely clear design and construction of the intention. 2. drawings catalogue and door and window list List of drawings is to understand the architectural design of the overall situation from the directory, which can clear the number of drawings and main function of the map size and number as well as engineering construction units and the whole building, if the drawings differ from actual drawings, must check and construction. Windows and doors table, I believe we will not be unfamiliar, that is, doors and windows number, as well as doors and windows size and practices, which in everyone in the structure of the calculation of the load is essential. 3. architectural design general description General introduction of the architectural design is very important for the design of the structure, because the general introduction of the architectural design will be mentioned in many ways and many to be used in the structure design of data, such as: building location (structure is used to determine the fortification contained snow and wind load), the Yellow Sea (elevation is used to c