施工放样作业（Construction lofting）.doc

施工放样作业（Construction lofting） Setting out work (1) Construction lofting (1) construction survey lofting process flow diagram; (two) construction survey lofting method and requirements; I. instructions The guide book is written according to the conventional method of lofting, lofting personnel must according to the actual situation, such as precision, the distribution of control points, the existing equipment, site conditions, calculation tool to select the measurement site and lofting points Different combinations of different design methods and different methods of nuclear examination. Different project and the same project of different stages, different parts of the lofting site accuracy requirements are different, so the accuracy requirements of the site and lofting points are not the same. During the operation, please strictly implement the engineering survey specifications, highway construction survey specifications and construction survey control procedures. The restriction mentioned in this book refers to the limitation of the specification. If there are special requirements in the design, it will be carried out according to the design requirements. Two, data collection and lofting plan formulation 1. before surveying and setting out, the plane and elevation control data of the construction area shall be obtained from the legal and effective way. 2., according to the site control point signs are stable and well, and so on, the existing control point data analysis, to determine whether all or part of the control points for testing. 3., the existing control points can not meet the precision requirements, should be re layout control, the existing control point density can not meet the needs of lofting, should be encrypted according to the existing control points. 4., according to the formal design drawings, documents, modify notice of measurement lofting, not with oral notice and unauthorized drawings lofting. 5., according to the specifications and design requir