钢筋的验收（Acceptance of reinforcement）.docVIP

钢筋的验收（Acceptance of reinforcement） Site acceptance shall include: the longitudinal reinforcement of varieties and specifications, quantity, location etc.. Connection, joint position, joint number and joint area percentage of reinforcement. Transverse reinforcement stirrup, varieties, specifications and quantity, distance etc.. The number and location of embedded parts specifications, etc.. Specific projects include: reinforcement force and bending hook, stirrup end is hook, steel processing, steel joint, the steel components of the same joint position, whether staggered stirrups encryption area. Steel mesh reinforcement of the encryption and the number of binding, its length and width of steel skeleton and mesh size, binding, their spacing, row spacing, the thickness of the protective layer, the center line of the location of embedded parts, center line position, level difference. The key is in the process of doing, we must ensure the quality, which is one of the most basic conditions. No matter is the supervision, Party A, Party construction must ensure the quality. Free with their own experiences to see more standardized. Whether the supervision or design personnel and party personnel acceptance is the basis of the design documents and the current construction specifications. The design document design drawings and the change of design, construction units to carry out construction in strict accordance with the design drawings. The following general inspection for reinforced: After the reinforcement installation is completed, before casting the concrete should be reinforced concealed engineering acceptance, which includes: (1) the longitudinal reinforcement of the varieties, specifications and quantity, location etc.; (2) reinforced connection, joint position, joint number and joint area percentage etc.; (3) stirrups, transverse reinforcement varieties, specifications, quantity, distance etc.. (4) the number and location of embedded parts specifications, etc.. Stee