midasgts模拟隧道渗流.pdf

Example-24 Title Tunnel Seepage Problem Description This exercise illustrates groundwater flow in a tunnel geometry (Fig. 24.1). 100m 1m m 5 . 2 20m m 1m 0 5 D=5m Fig. 24.1 Tunnel seepage problem description This illustrative example shows confined tunnel seepage and unconfined tunnel seepage problems and how they can be readily modeled and assessed inside GTS. -8 The hydraulic conductivity of the homogeneous foundation material is 1 ×10 m/sec and the dimensions of the problem are as shown in the figure. Analytical Solution The analytical solution is not exist. So the results are compared with the SEEP/W results. Compared results consist of total head contours, pressure head contours and the flow quantities. Example-24 GTS MODEL The finite element mesh and boundary conditions used for the analysis is shown in Fig. 24.2 for confined flow problem and Fig. 24.3 for unconfined flow problem.