drilling of tio2 and zns filled gfrp composites钻井的二氧化钛和硫化锌gfrp组合.pdfVIP

Journal of Minerals and Materials Characterization and Engineering, 2012, 11, 785-789 Published Online August 2012 (http://www.SciRP.org/journal/jmmce) Drilling of TiO and ZnS Filled GFRP Composites 2 1* 2 3 K. V. Arun , D. Sujay Kumar , M. C. Murugesh 1Department of Mechanical Engineering, Government Engineering College, Haveri, India 2Department of Studies in Industrial and Production Engineering, University B.D.T. College of Engineering, Davangere, India 3Department of Mechanical Engineering, Gowdara Mallikarjunappa Institute of Technology, Davangere, India * Email: bdt.arun@ Received March 13, 2012; revised April 30, 2012; accepted May 21, 2012 ABSTRACT In the present work an attempt has been made in order to investigate the drilling behavior of the TiO and ZnS filled 2 glass fabric reinforced polymer matrix composites (GFRP). The volume fractions in the matrix were chosen as 1%, 2% and 3%. Drilling has been conducted on a radial drilling machine. Speed of drilling and drill tool diameter were consid- ered as the varying parameters with three levels. Thrust force has been considered as the output parameter and is been measured in each combination of parameters chosen. Results reveal that, the addition of filler will increase the thrust force developed during drilling, also results indicate that, addition of filler will increase thrust force upto 2 vol% of filler thereafter increase in filler content r