EPR1750MW核电机组热经济性分析统一模型的建立.pdfVIP

第59 卷第1 期 VoL59 No.l 汽轮机技术 2017 年2 月 TURBINE TECHNOLOGY Feb.2017 EPR1750MW 核电机组热经济性分析 统一模型的建立 闰顺林，艾书剑，田东旭，谷 兵 (华北电力大学能源动力与机械工程学院，保定 071003 ) 摘要:在现有的核电机组热经济性分析统一模型的基础上，通过对比分析火电与核电的结构区别，建立了适用于 1750MW 核电机组的热经济性分析统一模型，并通过对比真实值及常规热平衡方法，证明了该模型的准确性，该模 型形式简单，可根据映射规则直接写出结构矩阵，方便准确，应用性广，为接下来的扰动分析奠定了基础。 关键词:1750MW 核电机组;二回路;映射规则 分类号:TK261 文献标识码:A 文章编号: 1001-5884(2017) 01α泊9-04 Establishment of Unified Model for EPR1750MW Nuclear Power Unit Thermal Economic Analysis YAN Shun-lin , AI Shu-jian , TIAN Dong-xu , GU Bing (School of Energy Power and Mechanical Engineering , North China Electric Power Universi町， Baoding 071ω3 ， China) Abstract: This paper builds up a unified model for thermal economic analysis of 1750MW nuclear power units. By com归ring the difference between thermal power and nuclear power , and analyzing the unified model of thermal economic analysis in 由e existing nuclear power plant , the unified model for thermal economic analysis of 1750MW nuclear 严Iwer 山lits is estahlished. The accuracy of the rnodel is proved by comparing the real value and the conventional heat balance method. 四le rnodel is simple in form ,which can be direcùy used to write the structure matrix according to 由e mapping rules. B四ides ， it is convenient and accurate ，皿d can be widely used ,which lays the foundation for the following perturbation analysis. Key words: 1750MW nuclear power unit; secondary circuit; mapping ruIes 的一级再热器，再经过以新蒸汽作为热源的二级再热器进行