木门油漆常见缺陷以及解决方法（Wood door paint common defects and Solutions）.docVIP

下载本文档

4
0
约1.4万字
约 16页
2017-08-30 发布于河南
举报
版权申诉

木门油漆常见缺陷以及解决方法（Wood door paint common defects and Solutions）.doc

1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

木门油漆常见缺陷以及解决方法（Wood door paint common defects and Solutions）

木门油漆常见缺陷以及解决方法（Wood door paint common defects and Solutions） Common causes of paint problems and Solutions I. pinhole: 1, the problem: in the pores of a tip phenomenon through the end of the film surface depression. The needle shaped keyhole is like a pinprick hole with a pore size of about 100 microns. 2, the cause of the problem: (1) surface treatment sheet is not good, wood wool... Common causes of paint problems and Solutions I. pinhole: 1, the problem: in the pores of a tip phenomenon through the end of the film surface depression. The needle shaped keyhole is like a pinprick hole with a pore size of about 100 microns. 2, the cause of the problem: (1) surface treatment sheet is not good, wood wool, wood thorn, filled with difficulties; (2) the bottom is not completely dry, so it works second times. (3) the paint is not fixed for a period of time. The paint is of high viscosity and the bubbles are not removed. (4) once construction is too thick. (5) errors of curing agent and diluent; (6) too much addition of curing agent. (7) environmental temperature and humidity are high; (8) the moisture content of wood is high. 3, countermeasures: (1) to China plate grinding formation, and then use the depot closed bottom; (2) many times, the construction time should be fully spaced, until the lower layer fully dried, and then construction second times; (3) with good paint to be static for a period of time, so that the bubble completely removed after construction; (4) the viscosity of the paint should be suitable, not too thick; (5) a one-time construction should not be too thick, so that thin brush more than once, the general single-layer thickness of not more than 20 mu m. (6) using the specified curing agent and diluent, according to the specified ratio. (7) do not work when the temperature and humidity are high. (8) wood should be dried to a certain moisture content before construction, generally 10-12%. Two, blistering: 1, the problem of the phenomenon: dry film after