颗粒缺陷相互作用下复合材料的细观损伤模型1).PDFVIP

48 6 Vol. 48 No. 6 2016 11 Chinese Journal of Theoretical and Applied Mechanics Nov.2016 1) 2) (050003) (050003) (050003) ( 621000) . . . . O346 A doi 101879-16-152 MICRO-DAMAGE MODEL OF COMPOSITE MATERIALS WITH PARTICLE AND DEFECT INTERACTION 1) Fu Yunwei Ni Xinhua2) Liu Xiequan Zhang Long Wen Bo (Department of Artillery Engineering Ordnance Engineering College Shijiazhuang 050003 China) (Department of Vehicle and Electric Engineering Ordnance Engineering College Shijiazhuang 050003 China) (Department of Basic Course Ordnance Engineering College Shijiazhuang 050003 China) (Hypervelocity Aerodynamics Institute China Aerodynamics Research and Development Center Mianyang 621000 Sichuan China) Abstract Stress concentration is much bigger around the sharp angle of the non-ellipsoidal particle than around the ellipsoidal particle, and the cracks beside the particles caused by the stress are the primary damage of composite ceramics. Particle caused crack usually extends to the composite matrix to form the penny crack when the particle is stier than the matrix and the interface is strong. Considering the crack propagation was controlled by the stress around the particle, the meso-damage mechanical model is obtained based on the eective self-consistent theory, to describe the damage evolution of the composite ceramic under simple tension. The influences of particle shape, sizeand stiness, and the distance between the crack and the particle on the composite damage are analyzed. The result indicate