jitter的产生（The generation of jitter）.docVIP

jitter的产生（The generation of jitter） As everyone knows, use the same decoder, connect the CD turntable different, there will be a different sound. If you are using an astronomical turntable, read the disc are the same, will not go to poor data should be read, why is there a difference? This is because, when the CD player reads the CD data in the dish, the constant line speed reading, namely, for example, when CD read in a circle in the data, data of 10 m / s, and when reading the outer data, may need to 100 m / s.. The CD data on a total of nearly 30 thousand times, that is to say, the turntable motor CD to improve the 30 thousand kinds of speed in order to better according to the requirements of the data read out of uniform, in fact, engage in motor control may understand, it is difficult to do, have different rotary motor, speed characteristic their own data out of the JITTER, so they have different. The computer to play CD, the data is read directly from the hard disk into SRAM, and then by the CPU control output, the speed is very fast, the speed dial problem does not exist in theory, this is the advantage of the HIFI computer, because computer clock is not the standard 44.1K clock, but down from the high frequency clock frequency computer the error is much larger than the CD data precision turntable. For example, as the CD data output once every 5 seconds, while the computer is working once every 3 seconds, so the output data or fast, or slow, the ideal output time is 0 seconds, 5 seconds, 10 seconds, 15 seconds, the computer can only in 0 seconds, 6 seconds 15 seconds, 9 seconds, although the total output, the output time has not changed, but the output data is in constant jitter. This positioning will cause jitter, audio. Secondly, the computer clock is not accurate, the error is very large, such as the 10M clock, so it is possible to have 10.005M, 10K, high frequency output, but the output of the 10.01k treble, we will feel the sound sounds too bright. If the