基于虚拟样机技术的椭圆振动筛仿真分析.PDFVIP

Total No. 174 　　　冶 　金 　设 　备 　　总第 174期 　　 　　　　　　　 　　　　　　　 　　 Ap ril 2009 METALLURGICAL EQU IPMENT 2009年 4 月第 2期 ·技术分析 · 基于虚拟样机技术的椭圆振动筛仿真分析 张 　锋 ① 　尹忠俊 　金 　玲 　孙 　洁 (北京科技大学机械工程学院 　北京 100083) 摘要 　近年来 , 由于兼具圆振动筛和直线振动筛的优点,椭圆振动筛在筛分领域中引起了广泛关注。在 椭圆振动筛椭圆运动轨迹形成机理的理论基础上 ,利用三维造型软件 Pro /ENGINEER 和多体系统动力学软 件 ADAMS,建立了双轴椭圆振动筛的虚拟样机模型 ,并对其运动轨迹进行了仿真 ,探讨了椭圆振动筛入口、 质心以及出口处运动轨迹的影响因素 ,为椭圆振动筛的合理设计和使用提供了参考依据。 关键词 　椭圆振动筛 　运动轨迹 　虚拟样机 　仿真 中图分类号 　TF321. 1　　　　　文献标识码 　 A 库 Simulation of Elliptic Vibrating Screen Based 例 on Virtual Prototype Technology 案 Zhang Feng　Yin Zhongjun　J in L ing　Sun J ie E ( School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083) A C ABSTRACT　In recent years, with the advantages of circle vibrating screen and straight vibrating screen, el lip tical vibrating screen has widely aroused the interest of all. In this paper, based on the theory of ellip tical move ment track formation mechanism, the virtual p rototype model of ellip tical vibrating screen with doubleaxle was estab 模 lished with Pro /E and ADAMS and simulation was taken. Factors which effect the movement tracks of the entrence, centroid and export of vibrating screen was discussed, which can p rovide reference for reasonable design of ellip tical 凯 vibrating screen. O KEYWO RD S　Ellip tical vibrating screen　Movement trac