nike的品质要求（Nike quality requirements）.docVIP

nike的品质要求（Nike quality requirements） Through this manual to describe the quality requirements of NIKE, NIKE also expects his cooperation factory to form a positive atmosphere with MQA as the center. objective NIKE (sports shoes) daily inspection training manual for the purpose: Reach a consensus on the quality requirements of NIKE finished shoes. Provide a standardized training manual for NIKE and FHI. Ensure that each factory /NLO implements consistent quality standards. MQA task statement To ensure that each pair of NIKE shoes meets or exceeds the quality requirements of the product through the control of the manufacturing process and the appearance of finished products. Two, inspection tools Inspection tools: Manual, SPEC, sample shoes, AQL reports, and special property reports. DI inspection reports, inspection boards, recent internal adhesion /IDS test reports and DI seals (documents must be unified in Asia). ? a ruler, vernier caliper, tape, label and bad shoelaces section. Three, inspection area The inspection room shall have the following conditions: Light is very important. It must be a white fluorescent lamp; Inspection at the back of the processing line (preferred) or bright ventilated room; The location is near the processing section or temporary warehouse; A cabinet for carrying shoes; Check the relevant packages / stickers / soft bottom stickers at the same time. The table is large enough? Can be placed in specified testing shoes; Inspection area should not be noisy. The work should be neat and free of needles, scissors, glassware, and anything else, To prevent it from falling into the inner box. No repairs, cleaning and trimming are allowed in the inspection area. The inspection area is not for cleaning, trimming or trimming. Shoes are PASS or FAIL depending on the quality of the shoes when they are opened. Four, DI does check procedures The daily DI is processed in line; Temporary storage shall be kept in accordance with processing line and productio