制砖原料标砖要求1（Brick material standard brick 1）.docVIP

制砖原料标砖要求1（Brick material standard brick 1） Autoclaved fly ash brick production line equipment is mainly in the production of fly ash lime gypsum fly ash, lime and gypsum as raw material of fly ash aggregate lime, gypsum material of fly ash autoclaved brick, it is a result of the laboratory analysis, raw material ingredients, digestion and roller mixing, pressing of new wall materials and by forming high pressure steam curing and new wall products comprehensive utilization is also actively promote the environmental protection and energy saving waste. Fly ash autoclaved brick production line needs raw materials include: 1, lime production of autoclaved fly ash brick should adopt lime, should be used as far as possible the effective calcium oxide content, high digestion speed, high digestion temperature normalizing fresh lime. Autoclaved fly ash brick in the amount of lime is the effective calcium oxide content calculation (see section Mix), the high content of calcium oxide in lime, lime can reduce the amount of WIP, thereby reducing the cost, and lime containing high effective calcium oxide can also improve the strength and other performance. The lime digestion speed, shortening the periods of mixture digestion process, improve production efficiency, digestion temperature is helpful in the early growth of the strength of adobe before curing. Different digestion methods have slightly different requirements for lime, but for ground degradation, the quality requirements of lime should be reduced. 2, fly ash for autoclaved fly ash brick of fly ash should be consistent with the JC409 fly ash Portland products regulations when using wet fly ash, in addition to the above requirements, should also control the water content in a range of requirements, the moisture content is 19%~23%. This is because the moisture content is too high, digestion prone node positions, rolling and molding difficult, pressed brick and dip mold, surface plasma, bending and other ills, even forming;