pcb过孔问题（PCB through hole problem）.docVIP

pcb过孔问题（PCB through hole problem） PCB through the hole,.Txt know how to let go of people find easy, know how to forget people find freedom, know how to care for people find happiness! The wisdom of a woman is to admire the intelligence of a man. Life is a lamp, work is an oil, and if it needs light, go for it! Love, fly to the horizon, feel steadfast, because of your concern; after breaking up, sitting at home feel weightless, because there is no direction. PCB through the hole.Txt - you pedal both boats, you row really beautiful. Every man who says he doesnt want to be in love has an impossible man in his heart. I love every unhappy but still laughing child. (there is no one, see through me, invisible, know Im waiting for someone). Discussion on vias in PCB design Through hole (via) is one of the important components of multilayer PCB, and the cost of drilling usually accounts for 30% to 40% of the cost of PCB board. In brief, each hole on the PCB can be called vias. From the point of view of function, vias can be divided into two categories: one is used as an electrical connection between the layers, and two is used as a device for fixing or positioning. If the process from the process, these vias are generally divided into three categories, namely blind hole (blind, via), via (buried) and through hole (through via). The blind hole is located on the top and bottom surface of the printed circuit board and has a depth that is used for the connection of the surface line and the inner line below. The depth of the hole usually does not exceed a certain ratio (Kong Jing). A buried hole means a connecting hole in the inner layer of a printed circuit board, which does not extend to the surface of the circuit board. The two types of holes are located in the inner layer of the circuit board, and are completed by using the through hole forming process before lamination, and may be overlapped in the process of hole formation, so as to make a few inner layers. The third is cal