pm14慢速绞车的设计（Design of pm14 slow winch）.docVIP

pm14慢速绞车的设计（Design of pm14 slow winch） China mine small grain mainly refers to the car and dispatching winch winch, it has experienced two stages of imitation, self design. In the early days of liberation, the small mine cars used in Japan were made in Japan and the Soviet Union, so the small mine winch produced at that time was also the product of Surveying and mapping the imitation of Japan and the Soviet union. After 1985, these products have been picked up, and the Soviet winch has been improved, and in 1964 entered the stage of self design. The Huainan coal machinery plant has designed and manufactured the cycloidal gear winch and the small tooth difference drive winch. Xuzhou mining equipment factory was designed and the cycloid planetary gear transmission lines of cars, some factory also produced the design of dispatching winch 25kW Xuzhou, Huainan Jinzhou mining machinery factory has designed and manufactured a power dispatching winch, 40kW 55kw. Winch is generally experienced two stages of imitation and self design, until the 80s use is the imitation of the old products in mid 80s began to design new winch, mainly aimed at the effect of the mechanical design of the low rate of worm gear, slow and fast rope back work and other aspects of fundamental improvement. In terms of mine winch standardization, 1967 formulated the standard of dispatching winch, winch department in 1971 to develop a standard. In 1982, the above two standards were revised, and the standard was JB965 - 83, JB1409 - 83. In our country, the winch is mostly planetary gear drive, and the structure has four basic forms. 1. way shaft type The utility model is characterized in that the vertical shaft is penetrated through, and the rigidity of the whole machine is strong, and the meshing precision of the gears in the running process can be ensured. Therefore, the utility model has the advantages of small noise and long service life, and the structure parts are simple, easy to manufacture and mai