补玛（Fill Ma）.docVIP

补玛（Fill Ma） The 1. complement and the source code conversion process is almost the same. The numerical complement representation is also divided into two cases: (1): the original code and the same positive complement. For example, the complement of +9 is (2) complement negative sign bit is 1, the absolute value for the number of the original code according to the bit reverse; then the number 1. For example, -7s complement: because it is negative, then the sign bit is 1, the the remaining 7 is the absolute value of the original +7 -7 0000111, the reverse is 1111000, plus 1, so the complement of -7 is 2. why octal and sixteen octal systems are required? Programming, we usually use 10 or hexadecimal...... C/C++ must be a high-level language. Such as: Int a = 100, B = 99; However, since data representation in the computer ends up in binary form, sometimes binary can be used to solve problems more intuitively. But the binary number is too long. For example, the int type occupies 4 bytes and 32 bits. For example, 100 will be expressed in binary numbers of the int type: 0000000000000000,No one would like to think or operate in such a long amount of time. Thus, C and C++ do not provide methods for directly writing binary numbers in code. 16 or 8 can solve this problem. Because the larger the hexadecimal number, the shorter the length of the expression. But why is it 16 or 8 hexadecimal instead of the other, such as 9 or 20? 2, 8 and 16, respectively, are the 1 and 3 sides of the 2, The 4 party. This allows the three binary systems to convert very directly to each other. 8 decimal or 16 binary shortened the number of binary, but maintained the binary number of expression features. You can find this in the following course on hexadecimal conversion. Two, eight, and sixteen decimal numbers converted to decimal numbers Binary numbers converted to decimal numbers The weight of zeroth bits of binary number is the 0 Party of 2, and the weigh