管螺纹的标准（Standard for pipe threads）.doc

管螺纹的标准（Standard for pipe threads） Standard for pipe threads: Pipe thread: mainly used for pipe connection, so that its internal and external thread with tight, straight and cone two. The common pipe threads mainly include the following: NPT, PT, G and so on. 1:NPT thread is the American Standard 60 degree cone pipe thread, 2:PT (BSPT) thread is European and Commonwealth 55 degree sealed taper pipe thread, 3:G thread is 55 degrees, non thread seal pipe thread, 4:ZG thread is 1) NPT is National (American) PipeThread abbreviation, belong to American Standard 60 degree vertebral canal thread, be used in North America area, GB check GB/T12716-1991. 2) PT (BSPT) is the abbreviation of PipeThread, is 55 degrees circular canal sealing thread, belonging to the Whitworth family, for Europe and the Commonwealth, commonly used in water and gas pipe industry, taper 1:16, GB GB/T7306-2000 consulting. The domestic name is ZG. 3) G is a 55 degree non thread sealing pipe thread, belonging to the family of Wyeth threads. Marked G represents cylindrical thread. GB check GB/T7307-2001. The difference between metric thread and English thread: Metric threads are represented by pitch, and American and British threads are expressed in thread per inch; Metric thread is 60 degrees equilateral tooth type, thread is isosceles 55 degree tooth type, thread is isosceles 60 degree tooth type. Metric metric units (such as mm), metric inch units (such as inches) used in American and British threads; Man in business usually uses points to refer to thread sizes. One inch equals 8, 1/4 inches is 2, and so on. In addition, there are: ISO - Metric thread standard 60 degrees; UN - unified thread standard 60 degrees; API - American petroleum pipe thread standard 60 degrees; W - British Wyeth thread standard 55 degrees; NPT BSP thread technology -- NPT, PT, G thread difference NPT, PT, G, the difference between the various threads NPT, PT, and G are pipe threads NPT is the abbreviation of National (American