基于proE的螺旋千斤顶毕业设计说明书.docVIP

攀枝花学院本科毕业设计（论文） 基于Pro/E的螺旋千斤顶（5t）及主要零件加工工艺设计 学生姓名： 学生学号： 院（系）： 机电工程学院 年级专业： 2007级机械设计制造及其自动化 指导教师： 助理指导教师： 二〇一一年六月  摘 要 由于螺旋千斤顶是一种小型的起重设备，体积小方便携带，造价成本低，所以在日常生活中被广泛应用。 螺旋千斤顶主要是由螺杆、螺母、手柄、底座、大伞齿轮、小伞齿轮、机架、棘轮组、升降套筒等零部件组装而成的。在本次设计过程中对螺旋传动的计算和各零部件的设计与选材最为重要；并且重点运用了机械设计方面的知识，另外还运用了辅助绘图工具AutoCAD、Pro/E等。 本文从螺旋千斤顶的零部件的设计与选材等多方面，阐述了它设计的全过程。尤其在工艺规程设计中，运用了大量的科学加工理论及计算公式，对它进行了精确地计算。 特别是在螺旋传动部分，通过对耐磨性的计算、螺杆稳定性校核、螺旋机构的耐磨性计算、螺母螺纹牙的计算、自锁性校核和各种强度计算。通过各种科学的计算使设计出来的螺旋千斤顶更加能够满足各种实际的需求。同时对主要零件的加工工艺进行了详细的阐述。在本次设计中使用了Pro/E进行了许多零件和传动机构的三维建模，清楚形象的表示出了各种零件的外形和结构。 关键词：千斤顶，螺旋传动，Pro/E  Abstract As the Spiral jack is a kind of lifting equipment, besides, it has small size and portability, and low cost, so it is widely used in our daily life. Spiral jack is consist with screw, nut, handle, base, large bevel gear, rundlet gears, racks, ratchet set, lifting the sleeve and other parts. It is most important to calculate the Spiral driven and design and selection for the parts, in this design process; what is more, used the knowledge of mechanical design, in addition to used CAD tools such as AutoCAD, Pro / E and so on.  This article described the whole process of its design from the spiral jack design to the selection of components and other aspects. It was precisely calculated because it used a large number of scientific processing theory and formula, especially in process planning. In the spiral transmission part, through the calculation of wear resistance, stability check of the screw, screw mechanism of the resistance calculation, the calculation of the nut thread teeth, self-locking of the check and a variety of strength calculation. Through a variety of scientific calculations the screw jack designed will meet the actual demand. In this design, we used Pro/E to design a number of parts and transmission of three-dimensional modeling, it clearly s