装修木工工艺（Woodworking decoration）.doc

装修木工工艺（Woodworking decoration） Decoration in carpentry construction process detailed Find decoration decoration company preferred home decoration company website: / Service tenet: advocating freedom, the pursuit of perfection, reasonable budget price, excellent construction technology, quality engineering services, one-stop service decoration, in good faith for the home life and cultural space of every customer tailored care, elegant and comfortable. Check the base material, choose 30mmX40mm wood keel and 15mm thick Blockboard as the base material. 2, check before the construction of grassroots wall roughness, error less than 3mm. 3, Mentao Blockboard material base must be set for the basic material, wood drying a wedge fixed solid ground 5mm, prevent water invasion, check the flatness and verticality, flatness and verticality tolerance + 1mm, allow diagonal error 2mm, above the door is about detection angle to the horizontal line distance, all the doors should be be highly consistent, the same type of door width, bedroom, study the door is generally 800mmX2000mm, the bathroom door is 700mmX1900mm, or 650mmX1950mm, leaf thickness is 38mm. 4, if the side window, closed side window using wooden keel frame, 50mm thick strip spacing board, 20mm wide, and the original plaster relief for the 15mm side window around the old plaster layer destroyed 50mm nail, steel net mortar, plastering layer does not exceed the wall plastering, focus on examination. 5, the door leaf use double 15mm thick wood plate strip production, wood board width is 120mm. 2 vertical root, lateral root 5, a lock at the special reinforcement, wood board should be cross opening treatment, to prevent deformation, such as doors and windows do parquet, use double 12mm thick board double seal 5 panels, in the panel parquet, sealing panel, flat heavy pressure for 48 hours. Such as the use of solid wood doors, water ratio should be 8%-12%, before use should be polished to brush two times after priming use, doo