可耐福（Knauf）.docVIP

可耐福（Knauf） Kenaifu. Knauf company was founded in 1932, headquartered in Bavaria, Germany e-pro Eindhoven, the largest producer of natural gypsum, with an annual output of 2 million tons in total. Now, the company has become the worlds largest Knauf gypsum products manufacturer, has more than 200 factories in the world, companies, products all over the world. Since 1995 Since entering China, a total investment of 5 Knauf factories, the annual production capacity of gypsum board in Chinese up to 100 million square meters, the sales network covering the whole country. In China, Knauf Mainly engaged in the manufacture of a variety of products including gypsum, gypsum board, light steel keel, caulking putty, gypsum binder, gypsum and other accessories with number of ancillary products, and gypsum board production equipment etc.. The advantages of Knauf plasterboard; 1 light Knauf plasterboard partition system weight is about 20kg/m2, less than ordinary sand brick wall 1/10. The total weight of the whole building is thus greatly reduced, The cost of the bearing structure and the foundation is reduced effectively, and the seismic design of the building is also beneficial. 2. Effective use of space Kenaifu plasterboard partition system is generally 74cm 1/2 is only half of the brick wall, saving 50% of the area, if the Knauf plasterboard ceiling system, Between the concrete floor and ceiling bottom distance up to 60mm, so as to obtain more useful space. 3. Easy to lay pipelines and install equipment Kenaifu plasterboard ceiling space within the system and provide an ideal and practical space for installation of various pipelines, and can be easily installed in various equipment and keel gypsum board. 4. Better installation effect Knauf plasterboard system according to the design of decorative colorful shapes, the surface can be a variety of surface decoration, and can be installed in the pipeline because of various internal gypsum board system, Knauf plasterboard system com