如何做显示屏工程（How to do display project）.docVIP

如何做显示屏工程（How to do display project） How to choose the full-color led display screen size ? The general customers to buy led full-color display screen . The first thing to consider is the specifications of the led display. Lets see. led full color display specifications are identified by those factors: 1, display environment. Its outdoor. Half outdoor. Or indoors?. The environment is different. The corresponding waterproof requirements are different. Outdoor waterproof requirements high. Usually over ip65. According to the environment in which we can determine the approximate scope of purchase is outdoor or semi outdoor full color display display. Indoor full color display is ! The best observation position from the installation of screen. Visual distance. This distance is very important. display it directly determines your choice model. General indoor full color display type is divided into P6, p7.62, P10, p12 etc.. Outdoor full color display type is divided into P10, p12, p16, P20 etc.. These are routine. And pixels screen, too. Bar screen. Special-shaped screen and other specifications, models are not the same. This is just routine. The number after the P is the distance between the lamp. The unit is mm. In general, the minimum of our visual distance is equivalent to the size of the digits behind P. P10s best pitch, 10 meters. This method is only approximate estimate! There is also a more scientific and specific method. It is the use of beads to count density per square. For example, P10 has a point density of 10000 points per square meter. The optimum distance is equal to 1400 divided by the square of the point density. Such as P10 is 1400/10000, open square = 1400/100=14 meters. That is, the best observed p10 screen is 14 meters away! The above two methods directly determine the specifications of the selected led full-color display screen . It is the customer in the purchase of time must pay attention to two points: 1, display environment.