安全防护设备设施（Safety protection equipment and facilities）.docVIP

下载本文档

17
0
约1.75万字
约 12页
2017-10-07 发布于河南
举报
版权申诉

安全防护设备设施（Safety protection equipment and facilities）.doc

1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

安全防护设备设施（Safety protection equipment and facilities）

安全防护设备设施（Safety protection equipment and facilities） Specifications for the use of a complete set of personal safety protective articles Safety helmet two, safety belt three, protective clothing four, protective glasses five, protective shoes six, protective gloves seven, inspection methods for commonly used safety protectors, eight, and how to configure personal protective articles Expand the use of a full set of personal safety protective equipment Safety helmet In the electric power construction site, the helmets worn by the workers are mainly intended to protect the head from injury. It protects the head from injury or reduces the extent of head injury in the following situations. (1) flying or falling objects hit the head; (2) when the workers fell from 2M and above; (3) when the head may shock; (4) in the low position of walking or working, the head may bump into sharp and hard objects. The helmet should be worn according to the standard and should be used in accordance with the regulations. If it is not used correctly, it will not be adequately protected. General attention should be paid to the following: (1) before wearing a helmet, the cap should be adjusted to the appropriate position after the head, and then fasten the elastic band in the cap. The cushioning cushion is adjusted by the belt, and the vertical distance between the top of the head and the top of the cap is between 25~50mm. At least not less than 32mm. In order to ensure that when the impact occurs, the cap has enough space for buffering, usually also conducive to head and head ventilation between the body. (2) dont hat askew, dont put your hat on the back of the brain. Otherwise, the helmet will reduce the impact of the protection of the impact. (3) the lower tie of the safety helmet must be buckled under the jaw and fastened, and the tightness should be moderate. So as not to be or be winds blew, other obstacles knocked off, or because of the head to and fro, the safety cap fell off. (4) the