自修复保险丝-参数(Self repairing fuse - parameters).docVIP

  • 7
  • 0
  • 约1.49万字
  • 约 11页
  • 2017-10-07 发布于河南
  • 举报

自修复保险丝-参数(Self repairing fuse - parameters).doc

自修复保险丝-参数(Self repairing fuse - parameters)

自修复保险丝-参数(Self repairing fuse - parameters) Self recovery fuse - parameters Self restoring fuse IH: maximum operating current (25 DEG C) IT: minimum operating current (25 DEG C) Itrip: overload current Tmax: maximum operating time of overload current Vmax: maximum overload voltage Imax: maximum overload current Rmin: minimum resistance (25 degrees Celsius) Rmax: maximum resistance (25 degrees Celsius) Self restoring fuses - Applications Various self restoring fuses Self recovery fuse in series DC/AC power circuit. You can select the DIP line or SMD surface mount.PPTC no polar points. Due to the PPTC in the protection of the state, the surface temperature is high, should be installed in the ventilation condition, the heat sensitive components do not contact directly with PPTC. Application range: Application of self recovery fuse in ADSL device Self recovery fuses are used in radio products, batteries, chargers, over-current protection applications in automotive electronics and components Remote control electric toy car, high and low frequency power charger, electric toy, baby carrier and other electronic toys Applications of satellite receiver DVB products Application of self recovery fuse in communication terminal equipment products Application of power supply products Home theater / loudspeaker / divider / electromagnetic load / motor / vacuum cleaner Application of self recovery fuse: Self restoring fuse 1. ballast Fluorescent lamps require a ballast to produce high voltage and high current. Ballasts control the electrical characteristics of fluorescent lamps. When the lamp is turned on, the electronic ballast generates a high voltage impact at both ends of the lamp to cause the lamp to be lighted, and a self oscillating circuit is formed in the electronic ballast, which is controlled by a transistor. Many electronic ballasts are faulty because of the light. When the light is shorted, the service life is reached or the lamp is taken off, an overflow occurs, leadin

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档