井口称重式计量系统在油田的应用.docVIP

井口称重式计量系统在油田的应用 李艾萤1 李秋莲2 张岳峰3 李秋香1 1大庆油田采油一厂 2大庆油田设计院 3 大庆油田工程建设公司天宇设计院 摘要：自提出将原来的“罐储车运” 的方式改造成管道输送的工艺，单井计量就成为实现管输的关键性技术问题。井口称重式计量系统主要由单井入口管路、多路阀、称重传感器、左位置传感器、右位置传感器、罐体、油气分离器、单井气出口管路、集料斗 、分布器、翻斗、浮子调节器、单井出口管路、单井汇流出口管路等组成。计量系统在装置上增设了一个全自动多路阀，可以分别接入≤30口单井，通过计算机实现单井的自动切换，连续测量每个单井的产液量，位置传感器检测翻斗的状态，自动检测、记录、打印、显示各单井的生产运行参数，可实现连续自动量油。该计量系统已经得到油田市场的充分认可，能较好地解决稠油粘度大和低油气比油井的单井计量问题,同时也满足稀油和高油气比油井的单井计量,具有广泛的适用性 关键词： 井口称重式计量系统 多路阀 自动量油 The Application of Wellhead Weighing Metering System in Oilfield Li Ai-ying1 Li Qiu-lian2 Zhang Yue-feng3 Li Qiu-xiang1 1 The First Oil Extraction Plant of Daqing Oilfield 2 The Design Institute of Daqing Oilfield 3 The Tian Yu Designing Institute of Daqing Oilfield Engineering Construction Co.Ltd Abstract: Put forward the original car tank storage transport converted into pipeline technology, single-well measurement will become a key technology for pipeline transporting. Wellhead weighing metering system is mainly composed of single well entry line, multi-channel valve position sensor, weighing sensor, left or right position sensor, tanks, oil and gas separator, single well gas export pipeline, hopper, distributor, skip, float controller, single well pipeline, single well flow export pipeline, etc. Metering system is added a full automatic multi-channel valve on the device, can access to ≤30 single-well respectively, through the computer to realize automatic switching of single well, continuous measurement of each single well produced fluid volume, skip position sensor, automatic detection, recording, printing, display operation parameters of each single well production, which can realize continuous automatic metering oil. The metering system has been recognized by the oil market, can well solve the low viscosity of heavy oil and oil and gas than single well oil well measurement problem, also can meet the thin oil and high oil and gas than single well oil well measurement at the same time, and has wide applicability