金川特大型复杂难采矿体开采支撑理论与关键技术综合研究.docVIP

金川镍矿尾砂膏体充填与 杨志强1，2 王永前2 高 谦1( 陈得信2姚维信2 (1 北京科技大学 金属矿山高效开采与安全教育部重点实验室 北京 100083 2 金川集团股份有限公司 甘肃 金昌 737100) 摘 要： 关键词：膏体充填；技术改造； 中图分类号：TD8531.34 文献标识码：ATechnology Reconstruction and Application for the Backfilling Paste Filling System Including Tailings in Jinchuan Nickel Mine YANG Zhi-qiang1，2 WANG Yong-qian2 GAO Qian1( CHEN De-xin2 YAO Wei-xin2 (1 Key Laboratory of High Efficient Mining and Safety of Metal Mine Ministry of Education Beijing 100083 2 Jinchuan Group Co. LTD Jinchuang Gansu Province 737100) Abstract：Paste filling technology is one of currently the most advanced and difficult technology. Since the end of the 80s and the mid 90s, Jinchuan mine introduced , filling system constructed and studied of the industrial application. Because the paste backfilling technology is the first time applied in in our country, then there are many problems in the design and engineering application. So that the paste filling system had remained non-normalproduction status for six years since had been used in production. Although research work was conducted continuously and technological transformation was carried out,the problems had not been sloved. Based on the engineering experience that had obtained in preliminary work, research of paste filling technology and system transformation were implemented from 2005 to 2006 and the significant development was obtained. The reforming stytem can regular?production and the filling production capacity increases year by year from 2006. The filling amount in 2011 was 200000 m3 which is up to the design production capacity of the paste filling stytem. This paper first introduces briefly the application status of the paste filling technology in our country,then generalizes the research progress and achievement of the tailling paste filling technology in Jinchuan mine. Findly, the development tendency of filling mining in Jinchuan mine. Keywords: Jinchuan nickel mine；paste filling；Technical re 前 言 充填法采矿是将一种或多种材料填充到