外文翻译原文-基于标准化的数字信息处理的PLC软件的自动生成.pdfVIP

Automated PLC Software Generation Based on Standardized Digital Process Information Martin Bergert, Christian Diedrich Jens Kiefer, Thomas Bär Magdeburg University DaimlerChrysler Research Technology Institute of Automation Technology (IFAT) Function and Production Modeling (GR/EPF) Magdeburg / Germany Ulm / Germany uni-magdeburg.bergert@ jens.kiefer@ Abstract information, repeated manual inputs, additionally iteration loops as well as high time pressure for the In order to meet the various challenges in the PLC project (PLC: Programmable Logic Controller). automotive industry, new and integrated methodologies In order to cope with these challenges new planning for production planning and ramp-up processes are methodologies are necessary to encourage simul- required. Thus, a concept for automated PLC software taneous engineering. As one important contribution, a generation based on standardized digital process new methodology for automated PLC software information is introduced with the special focus on the generation is introduced in this paper. To give an over- needs of the body shop in the automotive industry. view, the paper starts with a short description of impor- The foundation for PLC software generation is a