面数据分段点高精度识别方法研究计算机集成制造系统.pdfVIP

面数据分段点高精度识别方法研究1 1 1+ 1 2 张 冉 ，张 旭 ，章海波 ，张学昌 （1.上海工程技术大学 机械工程学院，上海 201620 ；2.浙江大学 宁波理工学院，浙江 宁波 315100 ） 摘要：针对截面数据分段点提取精度不够，从而导致截面曲线重构精度差的问题，提出一种分段点精确提取方 1 法。这里重点研究相邻特征为直线特征和自由特征在满足G 连续时分段点的精确提取。首先根据曲率分析并辅以交 互经验提取初始分段点，以该分段点为界分割截面数据，提取出直线特征数据并拟合直线，剩余数据拟合样条曲线。 根据拟合的样条曲线设计判定方法，得到新的精度更高的分段点。最后以新分段点为边界并基于与直线的相切约束 重新拟合样条曲线。提出的分段点提取方法不仅能够在现有数据中寻找分段点，而且可以超越现有数据点并在其之 间寻找更精确的分段点。实例表明，该方法大大提高了分段点的提取精度，进而使重构的截面曲线更加符合初始设 计意图。 关键词：二维截面；曲线重构；约束优化；分段点 中图分类号：TP391 文献标识码：A Research on high-precision identification method of sectional data segmentation points 1 1+ 1 2 ZHANG Ran ,ZHANG xu ,ZHANG Hai-bo ,ZHANG Xue-chang (1.College of Mechanical Engineering, Shanghai University of Engineering Science, Shanghai 201620, China；2.Ningbo Institute of Technology, Zhejiang University, Ningbo 315 100, China) Abstract: Due to poor extraction accuracy of sectional data segmentation point, resulting in sectional curve reconstruction accuracy is poor, high-precision extraction method of segmentation point is proposed. The segmentation point of linear features and freeform features in G1 continuous is focused. Firstly, the initial segmentation point is extracted according to curvature analysis and interactive experience, and sectional data are divided based on the segmentation point, linear features data are extracted and fitted, the remaining data are fitted into spline curve. Then, the judgment method is designed to obtain new and higher-precision segmentation point based on the spline curve. Finally, taking the new segmentatio