利用斜探头在管道中选取纵向模态的实验研究.PDF

See discussions, stats, and author profiles for this publication at: /publication/290712014 Experimental research on longitudinal mode selection in pipes using angle beam probes Article · arch 2009 CITATIONS READS 4 19 4 authors, including: Zenghua Liu Bingao Wu Beijing University of Technology The University of Sheffield 76 PUBLICATIONS 322 CITATIONS 1 7 PUBLICATIONS 670 CITATIONS SEE PROFILE SEE PROFILE Some of the authors of this publication are also working on these related projects: Ultrasonic guided wave technique for SH of in-service wind turbine blades based on sparse dual- mode sensor arrays View project Laser-based Lamb wave phased array inspection technology of large metal plate-like structures View project All content following this page was uploaded by Zenghua Liu on 14 August 2016. The user has requested enhancement of the downloaded file. 第 26 卷第 3 期 Vol.26 No.3 工 程 力 学 2009 年 3 月 Mar. 2009 ENGINEERING MECHANICS 246 文章编号：1000-4750(2009)03-0246-05 利用斜探头在管道中选取纵向模态的实验研究 *刘增华，何存富，吴 斌，王秀彦 (北京工业大学机械工程与应用电子技术学院，北京 100124) 摘 要：对利用斜探头激励和接收高阶纵向模态进行了实验研究。通过 Snell 定理和超声导波的相速度频散曲线 选择斜探头的入射角和激励频率，可以激励所需的高阶纵向模态。但随着模态阶次和激励频率的增加，对单一模 态的控制也变得更加困难。同时，实验分析了激励斜探头个数对模态选取的影响，说明通过增加斜探头的个数来 抑制弯曲模态是十分必要的。 关键词：斜探头；模态；管道；相速度；频散 中图分类号：TB559; O348.8 文献标识码：A EXPERIMENTAL RESEARCH ON LONGITUDINAL MODE SELECTION IN PIPES USING ANGLE BEAM PROBES *