矿泉水瓶坯塑料模具的设计.docVIP

内容摘要 为了保证制造出理想的注射塑件，在这矿泉水瓶瓶坯塑料模具设计中必须考 虑塑件的成型工艺。瓶坯的成型工艺性与模具设计有直接的关系，只有塑件的设计能适应成型工艺要求，才能设计出合理的模具结构。 塑件的材料是聚对苯二甲酸乙二醇酯点浇口型面。斜导柱。其优点在于简化构，大大降低了模具的制造成本。通过模具设计表明能要求。Abstract An injection mold for the mineral water bottle perform is designed in this paper. Plastic material is PET.This is due to the high volume production of plastic parts and the exterior of plastic parts shell for longer, so the design uses a new type of hot runner technology and the single surface structure of the pin-point gate. Taking into account thread structure in the open end of the mineral water bottle perform, so it i