我国土工合成材料界面特性的研究和应用概况(英文)-Study interaction .pptVIP

Study on the interaction behavior of Geosynthetics and soil in China Bao Cheng-gang Ningbo Institute of Technology,Zhejiang University,China,315100 Yangtze River Scientific Research Institute,Wuhan,China,430010 contant Preface the different views on reinforcement mechanism Analysis of characteristics of interface and its effect on reinforcement Study on interface characteristics and shear band Experimental study of interface behavior Application of reinforcement in China Conclusion Preface In China, various kinds of geosynthetics are widely used for reinforcement purpose in civil engineering, water resource and hydropower engineering, environmental engineering, etc. the application of geosynthetics has brought a great benefit to a project not only in engineering aspect, but also in economic and environment aspects. However, the mechanism of reinforcement for geosynthetics is not fully understood, the development in analysis method and design theory is backward as compared with its engineering application. the traditional analysis method is not perfect to reflect the reinforcement mechanism of geosynthetics in soils. the calculated FS is always too small to reflect the real effect. the obtained increase of FS due to geosynthetics reinforcement with conventional circular arc method is only about 2-5%, such as, for Damudu Coast Embankment in Zhejiang Province is only 0.03. While the FEM is used for analysis, the increase of FS is only about 4%. So, the development of reinforcement technology for geosynthetics is inhibited. the mechanism of geosynthetics reinforcement, and its failure mode should be investigated. the reasonable analysis method and design theory should be proposed. In the past, the concern of most Chinese researchers is how the conventional circular arc method can still be used effectively in analysis of geosynthetics-reinforced structure. This effort has made some progress. when the balance of moment at the top face of reinforcement is considered