空间光学遥感器变形镜消热结构设计.pdf

Applied Physics 应用物理, 2014, 4, 203-211 Published Online December 2014 in Hans. /journal/app /10.12677/app.2014.412025 Athermal Design for Space Telescope Deformable Mirror Changzheng Chen Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun Email: may328@163.com th rd th Received: Nov. 19 , 2014; revised: Dec. 3 , 2014; accepted: Dec. 10 , 2014 Copyright © 2014 by author and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Abstract Space deformable mirror is widely used in compensating system wavefront error for space tele- scope. Space telescope resides harsh environment in space, and needs survive launch environment. Space deformable mirror is structurally non-kinematic. Thermal stress caused by thermal environ- ment may cause unacceptable figure error for optics due to material mismatch in CTE. A new ather- mal structure is proposed by flex transition for a Φ200 mm space deformable mirror with 19 actua- tors. Optimization design is performed. Final design shows the figure error PV/RMS 47.26 nm/9.31 nm for thermal environment change of ±8˚C, the figure error PV/RMS 20.56 nm/3.50 nm for gravity, and first mode 1832 Hz for dynamic performance. Athermal design meets design specification well. Keywords Space Telescope, Deformable Mirror, Athermal Design 空间光学遥感器变形镜消热结构设计 陈长征 中国科学院长春光学精密机械与物理研究所，长春 Email: may328@163.com 收稿日期：2014年11月19 日；修回日期：2014年12月3 日；录用日期：2014年12月10 日 摘 要 空间光学遥感器用变形镜可以校正光学系统像差，具有广泛的应用前景。由于空间光学遥感器所处空间 203 空间光学遥感器变形镜消热结构设计 环境恶劣，并需经受发射冲击振动等力学环境，因此空间光学遥感器变形镜需满足微重力变形，热