废旧刨花板水煮技术研究 Research on technology of water-thermal treatment for waste particleboard.pdfVIP

废旧刨花板水煮技术研究 王侠，杨永福，于志明 (北京林业大学北京市木材科学与工程重点实验室，北京100083) 摘要：探讨了利用水热处理废旧刨花板回收刨花的技术。主要从水热处理的温度、时间以及刨花板尺 寸三个因素进行实验分析。通过对刨花板的吸水率和厚度膨胀率以及所得刨花的筛分值进行测定， 得出废旧刨花板水热处理再生刨花的最佳工艺参数。研究表明，规格为20cmX20cm的废旧刨花板在 100。C沸水中处理60分钟，或高温高压水热处理20分钟可得到理想的再生刨花形态。 关键词：废旧刨花板；水热处理；再生刨花；筛分值 00 1 9--04 中图分类号：TS655 文献标识码：A 文章编号：1 1一056x(2008)02一oo Researchon ofwater-thermaltreatmentforwaste technology particleboard WANG Xia，YANG Yong-fu，YUZhi-ming forWoodScienceand (BeijingForestryUniversity,KeyLaboratory Engineering 100083，China) ofBeijing，Beijing Abstract：Thestatedthe ofwater-thermaltreatmentforwaste to the paper technology particleboardrecycledparticles． get the resultsfromthreefactors：the experiment of timeandthe Analyzing temperaturewater，theprocessing particleboard water andthickness mteofthe obtainedthebest of size．Bymeasuringabsorption swelling particleboard,we parameters water-thermaltreatmentforwaste resultshowedthatideal couldbe particleboard．The recycledparticles gainedusing waste of20cmx20cm 60minutesof water-thermaltreatmentor20minutesof particleboard by boiling hightemperature and water-thermaltreatment． highpressure words：waste value Key particleboard；water-thermaltreatment；recycledparticle；screening 我国是个木材消费大国，但森林资源十分匮乏