淮南丁集矿地面井Ⅵ型结构设计.pdfVIP

第 39 卷 2011 年第 1 期 辑 编 目 栏 本 淮南丁集矿地面井 Ⅵ 型结构设计 　 民 文 李 袁长颂，何章盛，梁　超 安徽理工大学机械学院　安徽淮南　232001 　 华 小 翟 摘要：为了有效治理瓦斯，解决工作面顶板为坚硬厚砂岩，采高大于 3.2 m，工作面推进速度大于 5 m/ d 的条件下，钻井钻杆常被错断，造成地面钻井突然停气这一技术难题，进行了“让抗”Ⅵ 型钻 井的结构设计、理论计算和现场试验。经过丁集矿 12 采区的 1262 (1) 工作面 6 号钻井连续 252 d 的现 场观测，结果表明，“让抗”Ⅵ 型钻井是特困地质开采条件下有效防止钻井被破坏的新技术。 关键词： “让抗”方案；Ⅵ 型钻井；结构设计；理论计算；现场试验 采 中图分类号：TD214　　　文献标识码：A　　　章编号：1001-3954(2011)01-0016-03 掘 Structural design of type VI surface shaft in Huainan Dingji Colliery YUAN Changsong, HE Zhangsheng, LIANG Chao School of Mechanical Engineering, Anhui University of Science Technology, Huainan 232001, Anhui, China Abstract To effectively control of methane and solve a technical problem that drilling stems often break and ： then causes the gas supply to halt suddenly on the condition that the roof of work faces is hard and thick sand- stone, the mining height is greater than 3.2 m, and forward speed of work faces is greater than 5 m/ d, the paper carries out the structural design, theoretical calculation and field test of first avoiding then resistive type ″ ″ Ⅵ shaft. After continuous 252-day drilling in no. 6 well on work face 1262(1) of mining area 12 in Dingji Colliery, it is showed that under tough geological and mining conditions the type Ⅵ shaft is a new technique to effec- tively protect the shaft drilling from destruction. Keywords plan of first avoiding