截齿齿体碳硼复合渗的性能.pdfVIP

第 39 卷 2011 年第 7 期 　 辑 编 目 栏 本 截齿齿体碳硼复合渗的性能研究 民 文 李 汪旭超，从善海，韩 芳，朱雪珍，张思思 武汉科技大学钢铁冶金及资源利用省部共建教育部重点实验室 湖北武汉 430081 摘要：针对采煤机截齿磨损失效的问题，对其进行碳硼复合渗试验。通过 XRD 及扫描电镜进行渗层 分析，并与专业生产厂家的标准处理工艺的试样进行了耐磨性对比试验。XRD 结果表明，40CrNiMo 钢碳硼复合渗后的渗硼层物相为 Fe B；扫描电镜照片测得渗层厚度约为 117 µm。耐磨性能测试表 2 明，碳硼复合渗的 40CrNiMo 钢的耐磨性是标准试样的 2.17 倍。 关键词：截齿；碳硼复合渗；耐磨性；40CrNiMo 采 中图分类号：TD42 文献标识码：A 文章编号：1001-3954(2011)07-0018-04 掘 Study on wear resistance of carburized and boronized cutting pick WANG Xuchao，CONG Shanhai，HAN Fang，ZHU Xuezhen，ZHANG Sisi Key Laboratory of Ferrous Metallurgy Resources Utilization, Ministry of Education, Wuhan University of Science Technology, Wuhan 430081, Hubei, China Abstract ：In view of abrasion failure of the cutting pick of the shearer, the test for carburization and boronization effects it is carried out. The penetration layer is analyzed by XRD and SEM and contrasted with standard specimens made by professional manufacturers in wear resistance. The XRD results show that the phase of penetration layer of carburized and boronized 40CrNiMo steel is Fe2B, and the penetration layer µ is 117 m in thickness. The wear resistance test shows that the wear resistance of carburized and boronized 40CrNiMo steel is 2.17 times as the standard specimens. Keywords ：cutting pick; carburizing and boronizing; wear resistance; 40CrNiMo 截 齿是安装在综合机械化采煤机最前端的割煤工