颗粒离散元法模拟卧式行星球磨机内钢球的运动规律.pdfVIP

第 39 卷 2011 年第 4 期 颗粒离散元法模拟卧式行星 　 辑 编 目 栏 本 球磨机内钢球的运动规律 华 小 翟 1, 2 1, 2 1, 2 1, 2 朱　飞 ，张林进 ，蔡道林 ，叶旭初 1 南京工业大学材料科学与工程学院　江苏南京　210009 2材料化学工程国家重点实验室 摘要：采用颗粒离散元法模拟了卧式行星球磨机筒壁上的衬板对磨筒钢球运动规律的影响，包含衬板 高度以及衬板数量的影响。研究结果表明：磨筒内钢球的平均接触力与钢球的运动状态存在明显的关 　 破 联；磨筒内衬板高度为 3 mm、衬板数量为 6 根时，磨筒钢球的抛落状态最好，钢球的平均接触力最 大。 磨 关键词：卧式行星球磨机；钢球；离散元法；数值模拟 +3　　　文献标识码：A　　　文章编号：1001-3954(2011)04-0055-05 中图分类号：TQ172.6 Motion simulation of grinding balls in horizontal planetary ball mills with distinct element method ZHU Fei1, 2, ZHANG Linjin1, 2, CAI Daolin1, 2, YE Xuchu1, 2 1College of Materials Science Engineering, Nanjing University of Technology, Nanjing 210009, Jiangsu, China 2State Key Laboratory of Materials-oriented Chemical Engineering Abstract The infl uence of the lining board on the motion of grinding balls in shells of horizontal planetary ： ball mills are simulated with distinct element method, and the height and the quantity of the lining board includ- ed. The study results show that the mean contact force are obviously related with the kinestate of grinding balls; when the thickness of the lining board is 3 mm and the quantity of the lining boards is 6, the grinding balls has the best kinestate and the mean contact force of grinding balls reaches the maximum. Keywords horizonta