从765465减到765249 然后显示hello 通过c语音来编译程序.docVIP

从765465减到765249 然后显示hello 通过c语音来编译程序 #includereg52.h #includeintrins.h #define uint unsigned int #define uchar unsigned char uchar code tabled1[]={0xc0,0xcf,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90,0x89,0x86,0xc7,0xc0,0xff}; uchar code tabled2[]={0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80}; void delay(uint); uchar temp,t0,t1,bai,shi,ge,dd,flag; uint shu; void init(); void display(uchar aa,uchar bb,uchar cc,uchar bai,uchar shi,uchar ge); sbit d1=P1^1; sbit d2=P1^2; void main() { init(); while(1) { if(dd!=1) { display(7,6,5,bai,shi,ge); } else display(10,11,12,12,13,14); } } void init() { shu=432; temp=0xfe; P0=temp; TMOD=0x11; TH0=(65536-50000)/256; TL0=(65536-50000)%250; TH1=(65536-50000)/256; TL1=(65536-50000)%250; EA=1; ET0=1; ET1=1; TR1=1; TR0=1; } void time0() interrupt 1 { TH0=(65536-50000)/256; TL0=(65536-50000)%250; t0++; if(t0==10) { t0=0; temp=_crol_(temp,1); P0=temp; } } void time1() interrupt 3 { TH1=(65536-50000)/256; TL1=(65536-50000)%250; t1++; if(t1==2) { t1=0; shu--; bai=shu/100; shi=(shu%100)/10; ge=shu%10; if(shu==398) { TR0=0; TR1=0; delay(5); dd=1; } } } void delay(uint z) { uint a,b; for(a=z;a0;a--) for(b=110;b0;b--); } void display(uchar aa,uchar bb,uchar cc,uchar bai,uchar shi,uchar ge) { P0=tabled2[0]; d2=1; d2=0; P0=tabled1[aa]; d1=1; d1=0; P0=0x00; delay(1); P0=tabled2[1]; d2=1; d2=0; P0=tabled1[bb]; d1=1; d1=0; P0=0x00; delay(1); P0=tabled2[2]; d2=1; d2=0; P0=tabled1[cc]; d1=1; d1=0; P0=0x00; delay(1); P0=tabled2[3]; d2=1; d2=0; P0=tabled1[bai]; d1=1; d1=0; P0=0x00; delay(1); P0=tabled2[4]; d2=1; d2=0; P0=tabled1[shi]; d1=1; d1=0; P0=0x00; delay(1); P0=tabled2[5]; d2=1; d2=0; P0=tabled1[ge]; d1=1; d1=0; P0=0x00; delay(1); } 方法二 #include reg52.h #include intrins.h #define uchar unsigned char #define uint unsigned int sbit dula=P1^1