宽厚板坯连铸结晶器渣道内热行为研究.PDF

Vol. 33 No. 7 铸造技术 Jul. 2012 FOUNDRY TECHNOLOGY 861 · · ●装备技术 Equipment Technology ● 宽厚板坯连铸结晶器渣道内热行为研究 1 2 2 2 1 潘贻芳 ，蔡兆镇 ， 祭 程 ，朱苗勇 ，侯 葵 (1.天津钢铁集团有限公司，天津300301 ；2.东北大学材料与冶金学院，辽宁沈阳110004) 摘 要： 根据宽厚板坯结晶器内初凝坯壳动态热收缩所确定的渣道宽度、保护渣的液-固状态及厚度分布、铸坯表面和铜 板热面的温度分布，以及气隙厚度的动态变化等，建立了结晶器渣道热流计算模型，并在此基础上，通过将该模型嵌入至结 合结晶器铜板分析的坯壳凝固过程二维瞬态热/ 力耦合有限元分析模型，研究分析了国内某钢厂实际宽厚板坯连铸工况下， 结晶器内某碳钢凝固过程中结晶器渣道内气隙、保护渣厚度分布，以及热流变化的规律。 关键词：宽厚板坯连铸；结晶器；渣道；气隙；热行为 中图分类号： 文献标识码： 文章编号： TG249.7 A 1000-8356(2012)07-0861-04 Simulation on Thermal Behavior of Generous Slab Continuous Casting Mold in Flux Channel 1 2 2 2 1 PAN Yi-fang , CAI Zhao-zhen , JI Cheng , ZHU Miao-yong , HOU Kui (1.Tianjin Iron and Steel Group Co., Ltd., Tianjin 300301, China; 2.School of Materials and Metallurgy, Northeastern University, Shenyang 110004, China) Abstract ： According to the width of mold flux channel between solidifying shell surface and the mold hot face as shell dynamic solidification contraction, the liquid-solid structure and distribution of mold flux, and the temperature distribution of slab surface and mold hot face, a heat flux model of mold flux channel was established. Based on this, by means of implanting the model into a 2D transient thermal-mechanical finite element model of shell solidification in mold combined with copper plate analys