AIX系统做RAID5.docVIP

AIX系统做RAID5 这是针对以前老机器的配置方法，现在的都应该是SAS接口的，有所变化，但原理都没变，先做Pdisk，再做Raid。 RAID5安装 厂家在出厂前应该把RAID卡安装在计算机内。 2.5.1 把独立诊断盘(Standalone Diagnostics)放入光驱，选择从光盘启动，引导到诊断程序界面，如下所示： HARDWARE SYSTEM MICROCODE Licensed Internal Code - Property of IBM (C) Copyright IBM Corp. 1990, 1994. All rights reserved. US Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. Processing the configuration. Please stand by. DIAGNOSTIC OPERATING INSTRUCTIONS VERSION 5.3.0.50 LICENSED MATERIAL and LICENSED INTERNAL CODE - PROPERTY OF IBM (C) COPYRIGHTS BY IBM AND BY OTHERS 1982, 2004. ALL RIGHTS RESERVED. These programs contain diagnostics, service aids, and tasks for the system. These procedures should be used whenever problems with the system occur which have not been corrected by any software application procedures available. In general, the procedures will run automatically. However, sometimes you will be required to select options, inform the system when to continue, and do simple tasks. Several keys are used to control the procedures: - The Enter key continues the procedure or performs an action. - The Backspace key allows keying errors to be corrected. - The cursor keys are used to select an option. To continue, press Enter. 2.5.2 按回车，继续： FUNCTION SELECTION 1 Diagnostic Routines This selection will test the machine hardware. Wrap plugs and other advanced functions will not be used. 2 Advanced Diagnostics Routines This selection will test the machine hardware. Wrap plugs and other advanced functions will be used. 3 Task Selection (Diagnostics, Advanced Diagnostics, Service Aids, etc.) This selection will list the tasks supported by these procedures. Once a task is selected, a resource menu may be presented showing all resources supported by the task. 4 Resource Selection This selection will list the resources in the system that are supported by these procedures. Once a resource is selected, a task menu will be presented