电气工程竣工验收报告-英文.docVIP

PLC cabinet equipment completion report Product name PLC cabinet Numbers PLC1-2 Standard GB7251.1-1997 The order OTV France Philippine branch Name San Antonio Date 2013-8-5 item Technical requirements conclusion 1 Appearance According to the drawing calls for inspection of appearance, lacquer layer intact, clean and tidy, material accords with drawings and the technological requirement. Cabinet tag , types, specifications conform the design Qualified □ Unqualified □ 2 Internal components installed ◆ The component appearance condition and attached certificate, manual, ex-factory inspection reports etc. ◆ The specification model and technical parameters should accord with your drawings. ◆ The according to specified requirements on the installation components, and has the products consistency. ◆ The electrical components of good quality and complete in accessory, aligned, fixation and good seal ◆ The wire electrical components between adopted tack terminal connections, terminals, connect with wire section matching are strong and reliable. Qualified □ Unqualified □ 3 Wiring ◆ The cable core and the selection of wire end all indicate its loop Numbers, Numbers should correctly, the handwriting clear and no cracks. ◆ The walk line clean, beautiful, wire connection and insulation good, no damage, dont go trough part should use coil pipe fold. ◆ The per terminal each side of the wiring appropriate for 1 root, does not exceed 2 roots. Qualified □ Unqualified □ 5 Door components installed ◆ The button, lights installed firmly, designation is clear, the button without jam phenomenon. ◆ The wire device connected, ends heave tight, and add terminal attachment or evade tin, without loose, broken stocks phenomenon. ◆ The wire using strands of soft wire, laying length have adequate power margin, exposed portion with coil pipe package. Qualified □ Unqualified □ 6 7 Mark and accessories ◆ A product nameplate and various labels is compl