铸造低合金贝氏体抗磨钢挖掘机铲齿材质的研究.pdfVIP

铸造低合金贝氏体抗磨钢挖掘机铲齿材质的研究 荣守范1郭继伟1沈大东1廖平2 (1佳小斯大学，黑龙江佳木斯154007；2佳小斯煤矿机械有限公司) 摘要：根据铲齿工作环境恶劣，经常出现脆断、易磨损、弯折，使用寿命周期短等特点， 采用不同的C，Si含量贝氏体耐磨钢，通过调整热处理工艺参数，获得不同的显微组织， 使材料的性能得以改善。实验证明，含碳量低时，冲击韧性随着等温温度的升高而降低。 当含碳量相同时，冲击韧性和硬度在310 4C时最好。这证实了不同的热处理工艺对这种材 料的影响，合适的工艺璃助于其力学性能的提高。 关键词：贝氏体-奥氏体；齿板；冲击韧性(Ak)；洛氏硬度(HRC) onthe Low BainiteSteelGrabShovelTooth Study CastingAlloying with WeatResistantance High RONG Ji-weil，SHEN Shou-fanl，GUO Da-dong‘，LIAOPin92 Jiamusi Jiamusi (1 Universi吼Helongjiang15400ZChina) CoalMineMechanical Jiamusi (2．Jiamusi Ltd．，Helongjiang154007，China) tothediffcrent shoveltoothoftentookONthe Abstract：Accordingworkingconditions，thegrab characteristicsof abrasionor whichreducedthe life crack，weaL ofthe bendingsnap usingperiod thedifferentcontentandheat-treatment CaN tooth，etc．AdoptingC，Si technologyparameters，we obtaindifferent material microstmcture，and mechanical showedthat improve performance．It wasreducedwiththe isothermal for lowercarbonsteels， impacttoughness increasing temperature the andhardnesswerethebestat310℃．whichthat suitableheat．treatment impaatoughness proved was availabletoincreasethematerialmechanical technology performance．