纳米SiC颗粒强化AA6061的磨粒磨损行为-JournalofNortheastern.PDFVIP

第32卷第11期 东 北 大 学 学 报 ( 自 然 科 学 版 ) Vol.32,No. 11 2011 年 11月 Journal of Northeastern niversity( Natural Science) Nov. 2 0 1 1 SiC AA6061 李晓丹, 翟玉春, 马军平 ( , 110819) : SiC AA6061, . :20N , AA6061 , 06%SiC/ AA6061 50%. SiC , / , SiC . , , .AA606120 N . : ;AA6061; SiC ; : TB 333 : A : 1005-3026(2011) 11-1583-04 The Abrasive Wear Properties of Aluminum Alloy 6061 Reinforced with Nano-Si Particles L I X iao-dan , ZH A I Yu-chun, MA Jun-p ing ( School of Materials Metallurgy, Northeastern niversity, Shenyang 110819, China. Corresponding author: ZHAI Yu-chun, E-mail: zhaiyc@ smm.neu.edu.cn) Abstract: Aluminium alloy 6061(AA6061) matrix composites reinforced with nano-SiC particles were produced. The microstructure, Vickers microhardness and characteristic wear properties of the composites were investigated. T he results showed that the wear rate and the friction coefficient values of the composites are lower than the matrix alloy at 20 N load, thewear rateof 06%SiC/ AA6061 decreases 50% than the matrix. This is attributed to the strong bonding between the matrix and the particles in the composites. So the presence of SiC particles in the composites improves thewear resistancebecausethese particles remain intact and retain their load- bearing capacity, they promote the formation of iron-rich transfer layer. The dominant wear mechanisms are found to be abrasion for the AA6061alloy and its composites at 20 N load. Key words: dry sliding wear; AA6061; nano-SiC reinforced; abrasive wear (AMC) , , . , [ 3] AMC . . SiC .