WTR010-SD录音模块.docVIP

Recording Module with SD Card WTR010-SD Manual Data Sheet Document Date: Apr. 20th, 2009 Document Revision: V1.0 Table of contents 1. Features 3 2. Wiring Instructions 3 MIC 3 Headphone Jack 3 SPK (2 Pins Terminal) 3 Power supply Option 1: -3V+ 3 Power supply Option 2 : DC socket 3 LED 3 LINE-IN recording 3 The Functions of 5 Pushbuttons 3 REC 3 PLAY / STOP 3 UP 3 DOWN 3 DEL 3 3. Note 4 4. Technical support 4 5. About us 4 1. Features ? Direct record message to SD card and play- back function. ? SD card recording module, 128MB to 2GB. ? Recorded message transfer to PC with SD card reader easily. ? Power supply DC5 -12V from DC socket or DC 3V from “-3 V+” Pins. ? Record wav format, 16KHz，4bit, mono. ? Duration depends on the SD card capability (2 minutes /1 MB). ? Headphone Jack for DAC output for con- necting to amplifier or headphone. ? LINE-IN MIC recording. ? Speaker output from two pin socket(0.5W，8ohm). ? With REC, PLAY/STOP, UP, DOWN, DEL. Buttons. ? Size: 56mm* 46mm*10mm 2. Wiring Instructions MIC For microphone recording Headphone Jack DAC output to headphone or amplifier SPK (2 Pins Terminal) Speaker output, access 0.5W, 8ohm speakers directly. Power supply Option 1: -3V+ “+” is positive 3V (2.5-3.3V applicable), “–“is negative (ground), make sure that supply a stable power. Power supply Option 2 : DC socket Suitable for DC 5-12 V power input LED Show the recording and playing, erasing state LINE-IN recording Connect a capacitor 104 from the R15 (connect to the point near R15 silkscreen), audio signals goes to pin11 of the chip through capacitor 104. That can achieve the purpose of LINE-IN input. Audio signal GND connects to Module GND. The Functions of 5 Pushbuttons REC: record button Version one: Negative Pulse record, K